|
|
|
|
This is multi function RAID hard drive enclosure for two 2.5" SATA hard drives. First, you can build your own a high performance RAID 0 (Striped two 2.5" SATA HDD) or a safety RAID 1 (Mirroring two 2.5" SATA hard drive) installed into a single 3.5" hard drive bay via SATA interface from your motherboard. Secondly, also you can build an external portable device with USB interface with RAID 0 or RAID 1 powered by two 2.5" SATA hard drives. This unit has build in hardware RAID engine, RAID configuration is done by DIP SWITCH easily.
It significantly improves the read/write performace for your desktop while RAID 0 applied or have Mirror (RAID 1) fault tolerance to secure your valueble data information.
RAID 0 (striped disks) distributes data across two disks in a way that gives improved speed and full capacity.
RAID 1 (mirrored disks) duplicates data across two disks in the array, providing full redundancy. Two disks each store exactly the same data, at the same time, and at all times. Data is not lost as long as one disk survives. Total capacity of the array is simply the capacity of one disk. At any given instant, each disk in the array is simply identical to every other disk in the array.
This Avolusion 2.5-inch USB 2.0/SATA Internal/External Aluminum Mobile RAID Hard Drive Enclosure is a complete RAID solution with support for external RAID modes including BIG (Span), JBOD (Single), Fast (Striping), SAFE (Mirror), SAFE33, SAFE50, Reserved or GUI only!
This Mobile RAID Hard Drive Enclosure accepts two SATA hard drives with data transfer rates of up to 3.0 Gbps and can be used as an internal drive in your PCs 3.5-inch drive bay!
This Mobile RAID Hard Drive Enclosure features an aluminum material for superb heat dissipation and includes one touch backup button for easy file backup!
Features:
Black design
Aluminum construction
USB 2.0 and SATA interface
Fits standard 3.5-inch drive bay
Supports two (2) SATA hard drives
Up to 480 Mbps data transfer rate for USB 2.0
Up to 3.0 Gbps data transfer rate for SATA
Complies with SATA I and SATA II interface with transfer rate of up to 1.5 Gbps - 3.0 Gbps
Supports RAID 0 & 1
Hardware RAID engine inside
One touch backup via software
Hot plug function
Mechanical lock
RoHS compliant
Supported External RAID Modes:
BIG (Span)
JBOD (Single)
Fast (Striping)
SAFE (Mirror)
SAFE33
SAFE50
Reserved
GUI only
Front Features:
Sys/backup button
HDD-1 Access and Failure LED
HDD-0 Access and Failure LED
Upper hard drive safety lock
Lower hard drive safety lock
Rear Features:
SATA 15-pin power connector
SATA 7-pin data connector
Mini USB port
RAID Mode Configuration Dip Switch
Change mode button
Unit Dimensions:
1 x 4.25 x 6-inches (H x W x D, approximate)
Regulatory Approvals:
CE
|
|
|
|
|
|
|