 |
 |
 |
|
Features:
- Supports RAID levels 0, 1, 0+1, 3, 5, 6 and JBOD
- Supports hot spare and automatic hot rebuild
- Allows online capacity expansion within the enclosure
- Local audible event notification alarm
- Supports password protection and UPS connection
- Built-in serial port interface / or Ethernet for remote event
notification
- Dual host channels support clustering technology
- Tagged command queuing for 256 commands, allows for overlapping data
streams
- Transparent data protection for all popular operating systems
- RAID ADG provides the highest level of data protection
- Supports multiple array enclosures per host connection
- Instant availability and background initialization
- Supports greater than 2TB per volume set (64-bit LBA support)
- Supports 4K bytes/sector for Windows up to 16TB per volume set
- Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
- Supports online Array roaming
- Online RAID level/stripe size migration
- Online capacity expansion and RAID level migration simultaneously
- Online Volume Set Expansion
Exceptional Manageability
- The firmware-embedded Web Browser-based RAID manager allows local or
remote management and configuration
- The firmware-embedded SMTP manager monitors all system events and user
notification automatically
- The firmware-embedded SNMP agent allows remote to monitor events via LAN
with no SNMP agent required
- Menu-driven front panel display
- Innovative Modular architecture
RAID Function
- New disk auto spare
- Host independent
- Environment monitor
- Online expansion
- Continuous rebuild
- Online consistency check
- Failed drive auto rebuild
- Failed drive indicators
- Audible alarm
- Password protection
- E-mail notification
- UPS connection
- Bad block auto-remapping
- Array Roaming
- SNMP Protocol Support
- Multiple RAID selection
- Online RAID level migration
- Background RAID initialization
- S.M.A.R.T.
Specification:
|
Manufacturer |
PROWARE |
|
Manufacturer Part # |
SB-3163E-F4A3 |
|
Form-factor |
3U 19-inch rackmount chassis |
|
RAID processor |
PowerPC 440SP |
|
RAID Level |
RAID 0,1,3,5,0+1,6,JBOD |
|
Cache memory |
512MB ~ 4G |
|
No. of channels (host+drive) |
2 + 16 |
|
Host bus interface |
FC-AL (4 Gb/s) |
|
Drive bus interface |
SATA II |
|
Data transfer rate |
Up to 400MB/Sec |
|
Back plane board |
SATA II |
|
Hot-swap drive trays |
Sixteen (16) 1-inch trays |
|
Hot-swap power supplies |
Two (2) 460W power supplies w/PFC |
|
Cooling fans |
4 |
|
Power requirements |
AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~63Hz |
|
Battery backup |
Optional |
|
Environmental |
|
Relative Humidity: |
10% ~ 85% Non-condensing |
|
Operating Temp: |
10¡ãC ~ 40¡ãC (50¡ãF ~ 104¡ãF) |
Dimensions
(H x W x D) |
5.24(H) x 18.98(W) x 23.62(D)inches |
|
Weight |
45.1 Lbs (without drives) |
|
Warranty |
1 Year Warranty |
Download Link:
|
|
|
 |
|
 |
|
