|
|
|
|
Features:
- Supports RAID levels 0, 1, 0+1, 3, 5, 6, 30, 50, 60 and JBOD
- Supports online Array roaming
- Online RAID level/stripe size migration
- Online capacity expansion and RAID level migration simultaneously
- Online Volume Set Expansion
- Supports multiple array enclosures per host connection
- Supports greater than 2TB per volume set (64-bit LBA support)
- Supports 4K bytes/sector for Windows up to 16TB per volume set
- Supports up to 128 LUNs per RAID set
- Transparent data protection for all popular operating systems
- RAID ADG provides the highest level of data protection
- Instant availability and background initialization
- Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
- Local audible event notification alarm.
- Supports password protection and UPS connection
- Serial port interface for remote event notification
- Redundant flash image for high availability
Specification:
Manufacturer |
PROWARE |
Manufacturer Part # |
SB-3163S-S3S3 |
Form-factor |
3U 19-inch rackmount chassis |
RAID processor |
Intel IOP341 64-bit |
RAID Level |
0,1,0+1,3,5,6,30,50,60 and JBOD |
Cache memory |
512MB ~ 2GB DDR2 SDRAM |
Expansion |
One 4x mini SAS (SFF -8088) |
Host bus interface |
Up to 300MB/sec per channel |
Drive bus interface |
SATA II |
Data transfer rate |
Up to 320MB/Sec |
Controller Redundancy |
Optional |
Hot-swap drive trays |
Sixteen (16) 1-inch trays |
Online capacity expansion,
RAID level / stripe size
migration
|
YES |
Online Volume sets
expansion
|
YES |
Online Array roaming |
YES |
Online consistency check |
YES |
SMTP manager and SNMP agent |
YES |
E-mail Notification |
YES |
Redundant Flash image
|
YES |
R-Link support
|
YES |
Support over 2TB per volume |
YES |
Instant availability and
background initialization
|
YES |
S.M.A.R.T. support
|
YES |
New disk insertion / removal detection
|
YES |
Failed drive auto rebuild
|
YES |
Continuous rebuild
|
YES |
Multiple RAID selection
|
YES |
Bad block auto-remapping
|
YES |
Audial alarm
|
YES |
Password protection
|
YES |
UPS connection
|
YES |
SES2 enclosure management |
YES |
Hot-swap power supplies |
YES |
Hot-swap power supplies |
460W power supplies w/PFC |
Cooling fans |
2 |
Power requirements |
AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~ 63Hz |
Battery backup |
4 |
Environmental |
Relative Humidity: |
10% ~ 85% Non-condensing |
Operating Temp: |
10oC ~ 40oC (50oF ~ 104oF) |
Dimensions
(H x W x D) |
133(H) x 482(W) x 600(D)mm |
Weight |
54.34Lbs (without drives) |
Warranty |
1 Year Warranty |
Download Link:
|
|
|
|
|
|
|